Assembly Instructions
  • For the assembly of the wall panels you need: connecting profile (H), corner profile 90 degrees, end profile (U) and wall panel.
  • For fixing the wall panel you need to use some wooden or metal rods (we recommend to dispose these rods at equal distances of 3545cm, and for a better sound insulation or thermal insulation plates of expanded polystyrene can be mounted between the rods).
  • If the spaces that must be covered with wall panels are larger than the length of the panel, connecting profiles can be used.
  • The installation is done only with screws resistant to corrosive agents and excessive fastening shall be avoided in order to avoid deteriorating the panel.
  • The installation can be done also with nails whitch are nailed into the groove of the panel. 1-1.5 x 15-20mm screws shall be used.
  • For cutting the assembly area for sockets and switches, core bits of adequate sizes are used.
  • The mountain can be done vertically, horizontally or diagonally.
  • The PVC polymer belongs to the composition with a high degree or resistance against any biological or chemical agent.
Maintenance Instructions
  • The PVC panels are easily maintained, by cleaning them periodically with a soft cloth and using dishwashing detergent and warm water.

Resist: heat, UV, moisture, frost and mechanical factors.